| Step | Reasoning |
|---|---|
| Identify the target quantity and its primary relationship. \[ x = v_L t \] |
The question asks for the horizontal distance x the launcher travels while falling, which depends on its horizontal recoil velocity and the time it takes to reach the floor. |
| Determine the time t it takes for the launcher to fall from height H. \[ H = \dfrac{1}{2}gt^2 \implies t = \sqrt{\dfrac{2H}{g}} \] |
The vertical motion is independent of the horizontal motion; since the launcher leaves the table horizontally, its initial vertical velocity is zero. |
| Use the conservation of momentum to find the recoil velocity v_L of the launcher. \[ p_{initial} = p_{final} \] \[ 0 = m v_0 + (M – m) v_L \] \[ v_L = -\dfrac{m v_0}{M-m} \] |
There are no external horizontal forces on the launcher-projectile system, so the total momentum of the system must remain zero. |
| Combine the expressions for velocity and time to find the horizontal distance. \[ x = \left| v_L \right| t = \left( \dfrac{m v_0}{M-m} \right) \sqrt{\dfrac{2H}{g}} \] |
Substituting the expressions for v_L and t into the distance formula yields the final symbolic expression. |
Why each choice is correct or incorrect:
(A) Uses the total mass M in the denominator, failing to account for the fact that the projectile’s mass is no longer part of the recoiling system.
(B) This is the correct answer.
(C) Incorrectly derives the recoil velocity by placing the recoiling mass in the numerator and the projectile mass in the denominator.
(D) Uses the incorrect time of flight t = sqrt(H/g), which misses the factor of 2 required by the constant acceleration kinematic equation for vertical displacement.
A Major Upgrade To Phy Is Coming Soon — Stay Tuned
We'll help clarify entire units in one hour or less — guaranteed.
A self paced course with videos, problems sets, and everything you need to get a 5. Trusted by over 15k students and over 200 schools.

A space probe of mass \(M\) is traveling at a constant velocity \(v_{0}\) through deep space. The probe consists of two modules: a scientific instrument of mass \(0.2M\) and a propulsion unit of mass \(0.8M\). An internal mechanism separates the two modules by pushing them apart with a constant force. After the separation, the scientific instrument is observed to be at rest relative to its original inertial frame of reference. Which of the following correctly describes the velocity of the center of mass of the two-module system after the separation, and provides a correct justification?

A projectile of mass \(m\) is fired horizontally with speed \(v_0\) toward a stationary block of mass \(M\) that is suspended from a rigid support by a light string of length \(L\). The projectile passes through the block and emerges from the other side traveling in the same direction with a speed of \(\alpha v_0\), where \(0 < \alpha < 1\). If the block subsequently swings upward, which of the following expressions represents the maximum height \(h\) reached by the block in terms of the given quantities and fundamental constants?

A block of mass \(m\) moves with speed \(v\) on a horizontal frictionless surface toward a stationary block of mass \(2m\). The stationary block is located at the lowest point of a vertical circular track of radius \(R\). The blocks collide and stick together, then immediately begin to move along the circular track. What is the magnitude of the normal force exerted by the track on the combined blocks immediately after the collision?

Two skaters, Skater X of mass \(M\) and Skater Y of mass \(3M\), are initially at rest on a horizontal, frictionless ice surface. The skaters push off from each other and move in opposite directions. Which of the following correctly compares the final kinetic energy \(K_X\) of Skater X and the final kinetic energy \(K_Y\) of Skater Y after they have separated?

Puck A with mass \(M\) is moving with speed \(v_0\) in the positive \(x\)-direction across a horizontal, frictionless surface. Puck B with mass \(2M\) is moving with speed \(v_0\) in the positive \(y\)-direction. The pucks collide at the origin and stick together, moving as a single object after the collision. What is the ratio of the total kinetic energy of the combined system after the collision to the total kinetic energy of the two-puck system before the collision?

An object of mass \(4M\) is at rest on a horizontal, frictionless surface. An internal explosion splits the object into two fragments of masses \(M\) and \(3M\). Immediately after the explosion, the fragment of mass \(M\) is observed to move to the left with speed \(v\). Which of the following expressions represents the total mechanical energy released during the explosion?

Two blocks of mass \(m\) and \(3m\) are held at rest on a horizontal, frictionless surface with a compressed spring of negligible mass between them. The blocks are released and move in opposite directions. Which of the following statements correctly describes the total momentum \(\vec{p}_{sys}\) and total kinetic energy \(K_{sys}\) of the two-block system after the blocks have lost contact with the spring?

A block of mass \(M\) is initially at rest on a horizontal, frictionless surface. A constant horizontal force of magnitude \(F\) is applied to the block for a time interval \(\Delta t\). Immediately after the force is removed, the block slides for an additional time interval \(t\). Which of the following expressions represents the distance \(d\) traveled by the block during the second time interval \(t\)?

Two pucks, each of mass \(M\), slide on a horizontal frictionless surface. Puck 1 moves with speed \(v_1\) in the \(+x\)-direction, and Puck 2 moves with speed \(v_2\) in the \(+y\)-direction. The pucks collide and stick together, moving with a final speed \(v_f\) at an angle \(\theta\) relative to the \(x\)-axis. If \(\tan \theta = \dfrac{3}{4}\), what is the ratio \(\dfrac{v_f}{v_1}\)?

A block of mass \(M\) is sliding in the \(+x\)-direction across a rough horizontal surface where the coefficient of kinetic friction between the block and the surface is \(\mu\). At time \(t_0\), an internal explosion splits the block into two fragments of masses \(m_1\) and \(m_2\). Immediately after the explosion, both fragments are still moving in the \(+x\)-direction. How does the magnitude of the acceleration of the center of mass of the two-fragment system, \(a_{cm}\), immediately after the explosion compare to the magnitude of the block’s acceleration, \(a_{block}\), before the explosion?
B
By continuing you (1) agree to our Terms of Use and Terms of Sale and (2) consent to sharing your IP and browser information used by this site’s security protocols as outlined in our Privacy Policy.
| Kinematics | Forces |
|---|---|
| \(\Delta x = v_i t + \frac{1}{2} at^2\) | \(F = ma\) |
| \(v = v_i + at\) | \(F_g = \frac{G m_1 m_2}{r^2}\) |
| \(v^2 = v_i^2 + 2a \Delta x\) | \(f = \mu N\) |
| \(\Delta x = \frac{v_i + v}{2} t\) | \(F_s =-kx\) |
| \(v^2 = v_f^2 \,-\, 2a \Delta x\) |
| Circular Motion | Energy |
|---|---|
| \(F_c = \frac{mv^2}{r}\) | \(KE = \frac{1}{2} mv^2\) |
| \(a_c = \frac{v^2}{r}\) | \(PE = mgh\) |
| \(T = 2\pi \sqrt{\frac{r}{g}}\) | \(KE_i + PE_i = KE_f + PE_f\) |
| \(W = Fd \cos\theta\) |
| Momentum | Torque and Rotations |
|---|---|
| \(p = mv\) | \(\tau = r \cdot F \cdot \sin(\theta)\) |
| \(J = \Delta p\) | \(I = \sum mr^2\) |
| \(p_i = p_f\) | \(L = I \cdot \omega\) |
| Simple Harmonic Motion | Fluids |
|---|---|
| \(F = -kx\) | \(P = \frac{F}{A}\) |
| \(T = 2\pi \sqrt{\frac{l}{g}}\) | \(P_{\text{total}} = P_{\text{atm}} + \rho gh\) |
| \(T = 2\pi \sqrt{\frac{m}{k}}\) | \(Q = Av\) |
| \(x(t) = A \cos(\omega t + \phi)\) | \(F_b = \rho V g\) |
| \(a = -\omega^2 x\) | \(A_1v_1 = A_2v_2\) |
| Constant | Description |
|---|---|
| [katex]g[/katex] | Acceleration due to gravity, typically [katex]9.8 , \text{m/s}^2[/katex] on Earth’s surface |
| [katex]G[/katex] | Universal Gravitational Constant, [katex]6.674 \times 10^{-11} , \text{N} \cdot \text{m}^2/\text{kg}^2[/katex] |
| [katex]\mu_k[/katex] and [katex]\mu_s[/katex] | Coefficients of kinetic ([katex]\mu_k[/katex]) and static ([katex]\mu_s[/katex]) friction, dimensionless. Static friction ([katex]\mu_s[/katex]) is usually greater than kinetic friction ([katex]\mu_k[/katex]) as it resists the start of motion. |
| [katex]k[/katex] | Spring constant, in [katex]\text{N/m}[/katex] |
| [katex] M_E = 5.972 \times 10^{24} , \text{kg} [/katex] | Mass of the Earth |
| [katex] M_M = 7.348 \times 10^{22} , \text{kg} [/katex] | Mass of the Moon |
| [katex] M_M = 1.989 \times 10^{30} , \text{kg} [/katex] | Mass of the Sun |
| Variable | SI Unit |
|---|---|
| [katex]s[/katex] (Displacement) | [katex]\text{meters (m)}[/katex] |
| [katex]v[/katex] (Velocity) | [katex]\text{meters per second (m/s)}[/katex] |
| [katex]a[/katex] (Acceleration) | [katex]\text{meters per second squared (m/s}^2\text{)}[/katex] |
| [katex]t[/katex] (Time) | [katex]\text{seconds (s)}[/katex] |
| [katex]m[/katex] (Mass) | [katex]\text{kilograms (kg)}[/katex] |
| Variable | Derived SI Unit |
|---|---|
| [katex]F[/katex] (Force) | [katex]\text{newtons (N)}[/katex] |
| [katex]E[/katex], [katex]PE[/katex], [katex]KE[/katex] (Energy, Potential Energy, Kinetic Energy) | [katex]\text{joules (J)}[/katex] |
| [katex]P[/katex] (Power) | [katex]\text{watts (W)}[/katex] |
| [katex]p[/katex] (Momentum) | [katex]\text{kilogram meters per second (kgm/s)}[/katex] |
| [katex]\omega[/katex] (Angular Velocity) | [katex]\text{radians per second (rad/s)}[/katex] |
| [katex]\tau[/katex] (Torque) | [katex]\text{newton meters (Nm)}[/katex] |
| [katex]I[/katex] (Moment of Inertia) | [katex]\text{kilogram meter squared (kgm}^2\text{)}[/katex] |
| [katex]f[/katex] (Frequency) | [katex]\text{hertz (Hz)}[/katex] |
Metric Prefixes
Example of using unit analysis: Convert 5 kilometers to millimeters.
Start with the given measurement: [katex]\text{5 km}[/katex]
Use the conversion factors for kilometers to meters and meters to millimeters: [katex]\text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}}[/katex]
Perform the multiplication: [katex]\text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}} = 5 \times 10^3 \times 10^3 \, \text{mm}[/katex]
Simplify to get the final answer: [katex]\boxed{5 \times 10^6 \, \text{mm}}[/katex]
Prefix | Symbol | Power of Ten | Equivalent |
|---|---|---|---|
Pico- | p | [katex]10^{-12}[/katex] | 0.000000000001 |
Nano- | n | [katex]10^{-9}[/katex] | 0.000000001 |
Micro- | µ | [katex]10^{-6}[/katex] | 0.000001 |
Milli- | m | [katex]10^{-3}[/katex] | 0.001 |
Centi- | c | [katex]10^{-2}[/katex] | 0.01 |
Deci- | d | [katex]10^{-1}[/katex] | 0.1 |
(Base unit) | – | [katex]10^{0}[/katex] | 1 |
Deca- or Deka- | da | [katex]10^{1}[/katex] | 10 |
Hecto- | h | [katex]10^{2}[/katex] | 100 |
Kilo- | k | [katex]10^{3}[/katex] | 1,000 |
Mega- | M | [katex]10^{6}[/katex] | 1,000,000 |
Giga- | G | [katex]10^{9}[/katex] | 1,000,000,000 |
Tera- | T | [katex]10^{12}[/katex] | 1,000,000,000,000 |
One price to unlock most advanced version of Phy across all our tools.
per month
Billed Monthly. Cancel Anytime.
We crafted THE Ultimate A.P Physics 1 Program so you can learn faster and score higher.
Try our free calculator to see what you need to get a 5 on the 2026 AP Physics 1 exam.
A quick explanation
Credits are used to grade your FRQs and GQs. Pro users get unlimited credits.
Submitting counts as 1 attempt.
Viewing answers or explanations count as a failed attempts.
Phy gives partial credit if needed
MCQs and GQs are are 1 point each. FRQs will state points for each part.
Phy customizes problem explanations based on what you struggle with. Just hit the explanation button to see.
Understand you mistakes quicker.
Phy automatically provides feedback so you can improve your responses.
10 Free Credits To Get You Started
By continuing you agree to nerd-notes.com Terms of Service, Privacy Policy, and our usage of user data.
Feeling uneasy about your next physics test? We'll boost your grade in 3 lessons or less—guaranteed
NEW! PHY AI accurately solves all questions
🔥 Get up to 30% off Elite Physics Tutoring
🧠 NEW! Learn Physics From Scratch Self Paced Course
🎯 Need exam style practice questions?