Step | Formula Derivation | Reasoning |
---|---|---|
1 | y = v_{0y}t + \frac{1}{2}gt^2 | Kinematic equation for vertical motion, where y is vertical displacement, v_{0y} is initial vertical velocity, t is time, and g is acceleration due to gravity. |
2 | v_{0y} = v_0 \sin(\theta) | Initial vertical velocity component, where v_0 is the launch speed and \theta is the launch angle. |
3 | y = v_0 \sin(\theta) t – \frac{1}{2}gt^2 | Substituting v_{0y}. |
4 | y_{\text{max}} = \frac{v_0^2 \sin^2(\theta)}{2g} | Maximum height formula, where y_{\text{max}} is the highest barrier the projectile can clear. |
5 | v_0 = \sqrt{\frac{2gy_{\text{max}}}{\sin^2(\theta)}} | Solving for launch speed v_0. |
Let’s calculate the launch speed v_0.
The launch speed required for the projectile to clear a barrier of 16.2 meters when launched at an angle of 22.0° above the horizontal is approximately \boxed{47.59, \text{m/s}}.
Phy can also check your working. Just snap a picture!
You kick a soccer ball with an initial velocity directed 53° above the horizontal. The ball lands on a roof 7.2 m high. The wall of the building is 25 m away, and it takes the ball 2.1 seconds to pass directly over the wall.
3 clay balls, labeled A, B, and C are launched from the same height at the same speed as shown below. A is launched at 30° above horizontal, B is launched horizontally, and C is launched 30° below the horizontal. They all hit the wall (before reaching the ground) in times tA, tB, and tC respectively. Rank these times from least to greatest.
Two balls are thrown off a building with the same speed, one straight up and one at a 45° angle. Which statement is true if air resistance can be ignored?
A rocket-powered hockey puck has a thrust of 4.40 N and a total mass of 1.00 kg . It is released from rest on a frictionless table, 2.10 m from the edge of a 2.10 m drop. The front of the rocket is pointed directly toward the edge. Assuming that the thrust of the rocket present for the entire time of travel, how far does the puck land from the base of the table?
A plane, 220 meters high, is dropping a supply crate to an island below. It is traveling with a horizontal velocity of 150 m/s. At what horizontal distance must the plane drop the supply crate for it to land on the island? Use g = 9.81 \, m/s^2.
47.59 m/s
By continuing you (1) agree to our Terms of Sale and Terms of Use and (2) consent to sharing your IP and browser information used by this site’s security protocols as outlined in our Privacy Policy.
Kinematics | Forces |
---|---|
\Delta x = v_i t + \frac{1}{2} at^2 | F = ma |
v = v_i + at | F_g = \frac{G m_1m_2}{r^2} |
a = \frac{\Delta v}{\Delta t} | f = \mu N |
R = \frac{v_i^2 \sin(2\theta)}{g} |
Circular Motion | Energy |
---|---|
F_c = \frac{mv^2}{r} | KE = \frac{1}{2} mv^2 |
a_c = \frac{v^2}{r} | PE = mgh |
KE_i + PE_i = KE_f + PE_f |
Momentum | Torque and Rotations |
---|---|
p = m v | \tau = r \cdot F \cdot \sin(\theta) |
J = \Delta p | I = \sum mr^2 |
p_i = p_f | L = I \cdot \omega |
Simple Harmonic Motion |
---|
F = -k x |
T = 2\pi \sqrt{\frac{l}{g}} |
T = 2\pi \sqrt{\frac{m}{k}} |
Constant | Description |
---|---|
g | Acceleration due to gravity, typically 9.8 , \text{m/s}^2 on Earth’s surface |
G | Universal Gravitational Constant, 6.674 \times 10^{-11} , \text{N} \cdot \text{m}^2/\text{kg}^2 |
\mu_k and \mu_s | Coefficients of kinetic (\mu_k) and static (\mu_s) friction, dimensionless. Static friction (\mu_s) is usually greater than kinetic friction (\mu_k) as it resists the start of motion. |
k | Spring constant, in \text{N/m} |
M_E = 5.972 \times 10^{24} , \text{kg} | Mass of the Earth |
M_M = 7.348 \times 10^{22} , \text{kg} | Mass of the Moon |
M_M = 1.989 \times 10^{30} , \text{kg} | Mass of the Sun |
Variable | SI Unit |
---|---|
s (Displacement) | \text{meters (m)} |
v (Velocity) | \text{meters per second (m/s)} |
a (Acceleration) | \text{meters per second squared (m/s}^2\text{)} |
t (Time) | \text{seconds (s)} |
m (Mass) | \text{kilograms (kg)} |
Variable | Derived SI Unit |
---|---|
F (Force) | \text{newtons (N)} |
E, PE, KE (Energy, Potential Energy, Kinetic Energy) | \text{joules (J)} |
P (Power) | \text{watts (W)} |
p (Momentum) | \text{kilogram meters per second (kgm/s)} |
\omega (Angular Velocity) | \text{radians per second (rad/s)} |
\tau (Torque) | \text{newton meters (Nm)} |
I (Moment of Inertia) | \text{kilogram meter squared (kgm}^2\text{)} |
f (Frequency) | \text{hertz (Hz)} |
General Metric Conversion Chart
Example of using unit analysis: Convert 5 kilometers to millimeters.
Start with the given measurement: \text{5 km}
Use the conversion factors for kilometers to meters and meters to millimeters: \text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}}
Perform the multiplication: \text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}} = 5 \times 10^3 \times 10^3 \, \text{mm}
Simplify to get the final answer: \boxed{5 \times 10^6 \, \text{mm}}
Prefix | Symbol | Power of Ten | Equivalent |
---|---|---|---|
Pico- | p | 10^{-12} | 0.000000000001 |
Nano- | n | 10^{-9} | 0.000000001 |
Micro- | µ | 10^{-6} | 0.000001 |
Milli- | m | 10^{-3} | 0.001 |
Centi- | c | 10^{-2} | 0.01 |
Deci- | d | 10^{-1} | 0.1 |
(Base unit) | – | 10^{0} | 1 |
Deca- or Deka- | da | 10^{1} | 10 |
Hecto- | h | 10^{2} | 100 |
Kilo- | k | 10^{3} | 1,000 |
Mega- | M | 10^{6} | 1,000,000 |
Giga- | G | 10^{9} | 1,000,000,000 |
Tera- | T | 10^{12} | 1,000,000,000,000 |
The most advanced version of Phy. Currently 50% off, for early supporters.
per month
Billed Monthly. Cancel Anytime.
Trial –> Phy Pro
A quick explanation
UBQ credits are specifically used to grade your FRQs and GQs.
You can still view questions and see answers without credits.
Submitting an answer counts as 1 attempt.
Seeing answer or explanation counts as a failed attempt.
Lastly, check your average score, across every attempt, in the top left.
MCQs are 1 point each. GQs are 1 point. FRQs will state points for each part.
Phy can give partial credit for GQs & FRQs.
Phy sees everything.
It customizes responses, explanations, and feedback based on what you struggle with. Try your best on every question!
Understand you mistakes quicker.
For GQs and FRQs, Phy provides brief feedback as to how you can improve your answer.
Aim to increase your understadning and average score with every attempt!
10 Free Credits To Get You Started
*Phy Pro members get unlimited credits
By continuing you agree to nerd-notes.com Terms of Service, Privacy Policy, and our usage of user data.