Phy can also check your working. Just snap a picture!
A 2,000 kg car collides with a stationary 1,000 kg car. Afterwards, they slide 6 m before coming to a stop. The coefficient of friction between the tires and the road is 0.7. Find the initial velocity of the 2,000 kg car before the collision?
A rubber ball with a mass of 0.25 kg and a speed of 19.0 m/s collides perpendicularly with a wall and bounces off with a speed of 21 m/s in the opposite direction. What is the magnitude of the impulse acting on the rubber ball?
A 2kg object slides east at 4 m/s and collides with a stationary 3 kg object. After the collision, the 2 kg object is traveling at an unknown velocity at 15° north of east and the 3 kg object is traveling at 38° south of east. What is each object’s final velocity?
A rubber ball bounces off of a wall with an initial speed v and reverses its direction so its speed is v right after the bounce. As a result of this bounce, which of the following quantities of the ball are conserved?
A 3800 kg open railroad car coasts along with a constant speed of 8.60 m/s along a level track. Snow begins to fall vertically and fills the car at rate of 3.50 kg/min. Ignoring friction with the tracks, what is the speed of the car after 90 min?
By continuing you (1) agree to our Terms of Sale and Terms of Use and (2) consent to sharing your IP and browser information used by this site’s security protocols as outlined in our Privacy Policy.
Kinematics | Forces |
---|---|
\Delta x = v_i t + \frac{1}{2} at^2 | F = ma |
v = v_i + at | F_g = \frac{G m_1m_2}{r^2} |
a = \frac{\Delta v}{\Delta t} | f = \mu N |
R = \frac{v_i^2 \sin(2\theta)}{g} |
Circular Motion | Energy |
---|---|
F_c = \frac{mv^2}{r} | KE = \frac{1}{2} mv^2 |
a_c = \frac{v^2}{r} | PE = mgh |
KE_i + PE_i = KE_f + PE_f |
Momentum | Torque and Rotations |
---|---|
p = m v | \tau = r \cdot F \cdot \sin(\theta) |
J = \Delta p | I = \sum mr^2 |
p_i = p_f | L = I \cdot \omega |
Simple Harmonic Motion |
---|
F = -k x |
T = 2\pi \sqrt{\frac{l}{g}} |
T = 2\pi \sqrt{\frac{m}{k}} |
Constant | Description |
---|---|
g | Acceleration due to gravity, typically 9.8 , \text{m/s}^2 on Earth’s surface |
G | Universal Gravitational Constant, 6.674 \times 10^{-11} , \text{N} \cdot \text{m}^2/\text{kg}^2 |
\mu_k and \mu_s | Coefficients of kinetic (\mu_k) and static (\mu_s) friction, dimensionless. Static friction (\mu_s) is usually greater than kinetic friction (\mu_k) as it resists the start of motion. |
k | Spring constant, in \text{N/m} |
M_E = 5.972 \times 10^{24} , \text{kg} | Mass of the Earth |
M_M = 7.348 \times 10^{22} , \text{kg} | Mass of the Moon |
M_M = 1.989 \times 10^{30} , \text{kg} | Mass of the Sun |
Variable | SI Unit |
---|---|
s (Displacement) | \text{meters (m)} |
v (Velocity) | \text{meters per second (m/s)} |
a (Acceleration) | \text{meters per second squared (m/s}^2\text{)} |
t (Time) | \text{seconds (s)} |
m (Mass) | \text{kilograms (kg)} |
Variable | Derived SI Unit |
---|---|
F (Force) | \text{newtons (N)} |
E, PE, KE (Energy, Potential Energy, Kinetic Energy) | \text{joules (J)} |
P (Power) | \text{watts (W)} |
p (Momentum) | \text{kilogram meters per second (kgm/s)} |
\omega (Angular Velocity) | \text{radians per second (rad/s)} |
\tau (Torque) | \text{newton meters (Nm)} |
I (Moment of Inertia) | \text{kilogram meter squared (kgm}^2\text{)} |
f (Frequency) | \text{hertz (Hz)} |
General Metric Conversion Chart
Example of using unit analysis: Convert 5 kilometers to millimeters.
Start with the given measurement: \text{5 km}
Use the conversion factors for kilometers to meters and meters to millimeters: \text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}}
Perform the multiplication: \text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}} = 5 \times 10^3 \times 10^3 \, \text{mm}
Simplify to get the final answer: \boxed{5 \times 10^6 \, \text{mm}}
Prefix | Symbol | Power of Ten | Equivalent |
---|---|---|---|
Pico- | p | 10^{-12} | 0.000000000001 |
Nano- | n | 10^{-9} | 0.000000001 |
Micro- | µ | 10^{-6} | 0.000001 |
Milli- | m | 10^{-3} | 0.001 |
Centi- | c | 10^{-2} | 0.01 |
Deci- | d | 10^{-1} | 0.1 |
(Base unit) | – | 10^{0} | 1 |
Deca- or Deka- | da | 10^{1} | 10 |
Hecto- | h | 10^{2} | 100 |
Kilo- | k | 10^{3} | 1,000 |
Mega- | M | 10^{6} | 1,000,000 |
Giga- | G | 10^{9} | 1,000,000,000 |
Tera- | T | 10^{12} | 1,000,000,000,000 |
The most advanced version of Phy. Currently 50% off, for early supporters.
per month
Billed Monthly. Cancel Anytime.
Trial –> Phy Pro
A quick explanation
UBQ credits are specifically used to grade your FRQs and GQs.
You can still view questions and see answers without credits.
Submitting an answer counts as 1 attempt.
Seeing answer or explanation counts as a failed attempt.
Lastly, check your average score, across every attempt, in the top left.
MCQs are 1 point each. GQs are 1 point. FRQs will state points for each part.
Phy can give partial credit for GQs & FRQs.
Phy sees everything.
It customizes responses, explanations, and feedback based on what you struggle with. Try your best on every question!
Understand you mistakes quicker.
For GQs and FRQs, Phy provides brief feedback as to how you can improve your answer.
Aim to increase your understadning and average score with every attempt!
10 Free Credits To Get You Started
*Phy Pro members get unlimited credits
By continuing you agree to nerd-notes.com Terms of Service, Privacy Policy, and our usage of user data.