Phy can also check your working. Just snap a picture!
A point on the edge of a disk rotates around the center of the disk with an initial angular velocity of 3 rad/s clockwise. The graph shows the point’s angular acceleration as a function of time. The positive direction is considered to be counterclockwise. All frictional forces are considered to be negligible.
A car accelerates from 0 to 25 m/s in 5 s. If the car’s tires have a diameter of 70 cm, how many revolutions does a tire make while accelerating?
A discus is held at the end of an arm that starts at rest. The average angular acceleration of 54 \, \text{rad/s}^2 lasts for 0.25 s. The path is circular and has radius 1.1 m.
Note: A discuss is a heavy, flattened circular object for throwing.
A solid sphere of mass 1.5 \, \text{kg} and radius 15 \, \text{cm} rolls without slipping down a 35^\circ incline that is 7 \, \text{m} long. Assume it started from rest. The moment of inertia of a sphere is I= \frac{2}{5}MR^2 .
A disk of radius 35 cm rotates at a constant angular velocity of 10 rad/s. How fast does a point on the rim of the disk travel (in m/s)?
2.35 rad/s2
By continuing you (1) agree to our Terms of Sale and Terms of Use and (2) consent to sharing your IP and browser information used by this site’s security protocols as outlined in our Privacy Policy.
Kinematics | Forces |
---|---|
\Delta x = v_i t + \frac{1}{2} at^2 | F = ma |
v = v_i + at | F_g = \frac{G m_1m_2}{r^2} |
a = \frac{\Delta v}{\Delta t} | f = \mu N |
R = \frac{v_i^2 \sin(2\theta)}{g} |
Circular Motion | Energy |
---|---|
F_c = \frac{mv^2}{r} | KE = \frac{1}{2} mv^2 |
a_c = \frac{v^2}{r} | PE = mgh |
KE_i + PE_i = KE_f + PE_f |
Momentum | Torque and Rotations |
---|---|
p = m v | \tau = r \cdot F \cdot \sin(\theta) |
J = \Delta p | I = \sum mr^2 |
p_i = p_f | L = I \cdot \omega |
Simple Harmonic Motion |
---|
F = -k x |
T = 2\pi \sqrt{\frac{l}{g}} |
T = 2\pi \sqrt{\frac{m}{k}} |
Constant | Description |
---|---|
g | Acceleration due to gravity, typically 9.8 , \text{m/s}^2 on Earth’s surface |
G | Universal Gravitational Constant, 6.674 \times 10^{-11} , \text{N} \cdot \text{m}^2/\text{kg}^2 |
\mu_k and \mu_s | Coefficients of kinetic (\mu_k) and static (\mu_s) friction, dimensionless. Static friction (\mu_s) is usually greater than kinetic friction (\mu_k) as it resists the start of motion. |
k | Spring constant, in \text{N/m} |
M_E = 5.972 \times 10^{24} , \text{kg} | Mass of the Earth |
M_M = 7.348 \times 10^{22} , \text{kg} | Mass of the Moon |
M_M = 1.989 \times 10^{30} , \text{kg} | Mass of the Sun |
Variable | SI Unit |
---|---|
s (Displacement) | \text{meters (m)} |
v (Velocity) | \text{meters per second (m/s)} |
a (Acceleration) | \text{meters per second squared (m/s}^2\text{)} |
t (Time) | \text{seconds (s)} |
m (Mass) | \text{kilograms (kg)} |
Variable | Derived SI Unit |
---|---|
F (Force) | \text{newtons (N)} |
E, PE, KE (Energy, Potential Energy, Kinetic Energy) | \text{joules (J)} |
P (Power) | \text{watts (W)} |
p (Momentum) | \text{kilogram meters per second (kgm/s)} |
\omega (Angular Velocity) | \text{radians per second (rad/s)} |
\tau (Torque) | \text{newton meters (Nm)} |
I (Moment of Inertia) | \text{kilogram meter squared (kgm}^2\text{)} |
f (Frequency) | \text{hertz (Hz)} |
General Metric Conversion Chart
Example of using unit analysis: Convert 5 kilometers to millimeters.
Start with the given measurement: \text{5 km}
Use the conversion factors for kilometers to meters and meters to millimeters: \text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}}
Perform the multiplication: \text{5 km} \times \frac{10^3 \, \text{m}}{1 \, \text{km}} \times \frac{10^3 \, \text{mm}}{1 \, \text{m}} = 5 \times 10^3 \times 10^3 \, \text{mm}
Simplify to get the final answer: \boxed{5 \times 10^6 \, \text{mm}}
Prefix | Symbol | Power of Ten | Equivalent |
---|---|---|---|
Pico- | p | 10^{-12} | 0.000000000001 |
Nano- | n | 10^{-9} | 0.000000001 |
Micro- | µ | 10^{-6} | 0.000001 |
Milli- | m | 10^{-3} | 0.001 |
Centi- | c | 10^{-2} | 0.01 |
Deci- | d | 10^{-1} | 0.1 |
(Base unit) | – | 10^{0} | 1 |
Deca- or Deka- | da | 10^{1} | 10 |
Hecto- | h | 10^{2} | 100 |
Kilo- | k | 10^{3} | 1,000 |
Mega- | M | 10^{6} | 1,000,000 |
Giga- | G | 10^{9} | 1,000,000,000 |
Tera- | T | 10^{12} | 1,000,000,000,000 |
The most advanced version of Phy. Currently 50% off, for early supporters.
per month
Billed Monthly. Cancel Anytime.
Trial –> Phy Pro
A quick explanation
UBQ credits are specifically used to grade your FRQs and GQs.
You can still view questions and see answers without credits.
Submitting an answer counts as 1 attempt.
Seeing answer or explanation counts as a failed attempt.
Lastly, check your average score, across every attempt, in the top left.
MCQs are 1 point each. GQs are 1 point. FRQs will state points for each part.
Phy can give partial credit for GQs & FRQs.
Phy sees everything.
It customizes responses, explanations, and feedback based on what you struggle with. Try your best on every question!
Understand you mistakes quicker.
For GQs and FRQs, Phy provides brief feedback as to how you can improve your answer.
Aim to increase your understadning and average score with every attempt!
10 Free Credits To Get You Started
*Phy Pro members get unlimited credits
By continuing you agree to nerd-notes.com Terms of Service, Privacy Policy, and our usage of user data.