Energy Archives • Page 3 of 4 • Nerd Notes

Home
Try PHY
Learning Hub

All Resources

Everything you need to master Physics — for free.

AI Problem Solver

Meet Phy. The world's most advanced AI helper.

UBQ

1000+ Physics problems + AI help to supercharge learning.

Speed Reviews

8 AP Physics units condensed into 8 short review guides.

AP Phys. Exam Prep

Proven tips, tricks, and hacks to help you score that coveted 5.

Learn from Scratch

Learn Physics, from scratch, at your own pace.
UBQ
Services

Elite 1-to-1 Coaching

Guaranteed performance boost in scores and understanding.

AP Exam Prep

5 weeks for a 5. Expedited progress. Stellar Results.

Learn AP Physics

100+ hours of guided instruction to simplify physics & boost grades

All Other Programs

Other 1-to-1 and group programs to accelerate Physics mastery.
Pricing
Courses

Learn Physics from Scratch

Self Paced. 100+ hours of lessons, worked examples, and targeted practice.

Nerd Notes Course Platform

A custom-built platform to simplify and accelerate your learning journey.

What we found:

A rescue helicopter lifts a 79 kg person straight up by means of a cable. The person has an upward acceleration of 0.70 m/s2 and is lifted through a distance of 11 m.

A projectile of mass 0.750 kg is shot straight up with an initial speed of 18.0 m/s.

A horizontal force of 110 N is applied to a 12 kg object, moving it 6 m on a horizontal surface where the kinetic friction coefficient is 0.25. The object then slides up a 17° inclined plane. Assuming the 110 N force is no longer acting on the incline, and the coefficient of kinetic friction there is 0.45, calculate the distance the object will slide on the incline.

A spring launches a 4 kg block across a frictionless horizontal surface. The block then ascends a 30° incline with a kinetic friction coefficient of 0.25, stopping after 55 m on the incline. If the spring constant is 800 N/m, find the initial compression of the spring. Disregard friction while in contact with the spring.

A 2 kg model rocket is launched with a thrust force of 275 N and reaches a height of 90 m, moving at 150 m/s at its peak. What is the average air resistance force acting on the rocket during its ascent?

A 5 kg cube rests against a compressed spring with a force constant of 1,800 N/m, initially compressed by 0.25 m. Upon release, the cube slides on a horizontal surface with a kinetic friction coefficient of 0.15 for 3.5 m, then ascends a 14° slope, stopping after 5 m. Determine the coefficient of kinetic friction on the slope.

It takes 4 seconds for an individual to push a 70 kg box up a 5m long, 12° ramp. The box starts from rest and achieves a speed of 2.5 m/s at the top. Friction does 350 J of work during its ascent. Calculate the power output of the individual pushing the box.

Using only work and energy, find the velocity of the masses after they have traveled 0.8 meters. Refer to the image above.

A 90 kg individual is cycling up a hill inclined at 30 degrees on a 12 kg bicycle. The hill is quite steep, and the coefficient of static friction is 0.85. The cyclist ascends 12 meters up the hill and then pauses at the summit. If they then start descending from the peak at rest and travel 9 meters before firmly applying the brakes, causing the wheels to lock.

A skier with a mass of 58 kg glides up a snowy incline that forms an angle of 28 degrees with the horizontal. The skier initially moves at a speed of 7.2 m/s. After traveling a distance of 2.3 meters up the slope, the skier’s speed reduces to 3.8 m/s.

A vehicle is moving at a speed of 12.3 m/s on a decline when the brakes of all four wheels are fully applied, causing them to lock. The slope of the decline forms an angle of 18.0 degrees with the horizontal plane. Given that the coefficient of kinetic friction between the tires and the road surface is 0.650, determine the distance the vehicle slides before it halts.

Two blocks, m2 > m1, having the same kinetic energy move from a frictionless surface onto a surface having friction coefficient [katex] \mu_k. [/katex].

A uniform solid cylinder of mass M and radius R is initially at rest on a frictionless horizontal surface. A massless string is attached to the cylinder and is wrapped around it, as shown in the figure below. The string is then pulled with a constant force F, causing the cylinder to rotate about its center of mass. After the cylinder has rotated through an angle θ, what is the kinetic energy of the cylinder (in terms of F and θ)?

A sphere of mass \( M \) and radius \( r \), and rotational inertia \( I \) is released from the top of an inclined plane of height \( h \). The surface has considerable friction. Using only the variables mentioned, derive an expression for the sphere’s center of mass velocity.

A 2,000kg car collides with a stationary 1,000 kg car. Afterwards, they slide 6 m before coming to a stop. The coefficient of friction between the tires and the road is 0.7. Find the initial velocity of the 2,000kg car before the collision?

A bullet of mass 0.0500 kg traveling at 50.0 m/s is fired horizontally into a wooden block suspended from a long rope. The mass of the wooden block is 0.300 kg and it is initially at rest. The collision is completely inelastic and after impact the bullet+ wooden block move together until the center of mass of the system rises a vertical distance h above its initial position.

Block 2 initially is at rest. Block 1 travels towards block 2 and collides with Block 2 as shown above. Find the final velocities of both blocks assuming the collision is elastic.

A 0.035 kg bullet moving horizontally at 350 m/s embeds itself into an initially stationary 0.55 kg block. Air resistance is negligible.

Two boxes are tied together by a string and are sitting at rest on a frictionless surface. Between the two boxes is a massless compressed spring. The string trying the two boxes is then cut and the spring expands, pushing the boxes apart. The box on the left has four times the mass of the box on the right.

A ski lift carries skiers along a 695 meter slope inclined at 34°. To lift a single rider, it is necessary to move 72 kg of mass to the top of the lift. Under maximum load conditions, five riders per minute arrive at the top. If 65 percent of the energy supplied by the motor goes to overcoming friction, what average power must the motor supply?

A 75.0kg log floats downstream with a speed of 1.80 m/s. Eight frogs hop onto the log in a series of perfectly inelastic collisions. If each frog has a mass of 0.30 kg and an upstream speed of 1.3 m/s, what is the change in kinetic energy for this system?

A rocket of mass \( m \) is launched with kinetic energy \( K_0 \), from the surface of the Earth. How much less kinetic energy does the rocket have at an altitude of two Earth radii? Give your answer in terms of the gravitational constant \( G \), the mass of the Earth \( m_E \), the radius of the Earth \( R_E \), and the mass of the rocket?

You kick a ball straight up. Compare the sign of the work done by gravity on the ball while it goes up with the sign of the work done by gravity while it goes down.

Jill does twice as much work as Jack does and in half the time. Jill’s power output is

A car traveling to the right with a speed \( v \) brakes to a stop in a distance \( d \). What is the work done on the car by the frictional force \( F \)? (Assume that the frictional force is constant)

How does the time t1 of a block m reaching the bottom of slide 1 compare with t2, the time taken block of mass 2m to reach the end of slide 2 thats curved? The blocks are released from the same height.

How does the speed v1 of a block m reaching the bottom of slide 1 compare with v2, the speed of a block 2m reaching the end of slide 2? The blocks are released from the same height.

A girl throws a stone from a bridge. Consider the following ways she might throw the stone. The speed of the stone as it leaves her hand is the same in each case. Case A: Thrown straight up. Case B: Thrown straight down. Case C: Thrown out at an angle of 45° above horizontal. Case D: Thrown straight out horizontally. In which case will the speed of the stone be greatest when it hits the water below if there is no significant air resistance, assuming equal initial speeds?

One end of a spring is attached to a solid wall while the other end just reaches to the edge of a horizontal, frictionless tabletop, which is a distance [katex] h [/katex] above the floor. A block of mass M is placed against the end of the spring and pushed toward the wall until the spring has been compressed a distance [katex] x [/katex]. The block is released and strikes the floor a horizontal distance [katex] D [/katex] from the edge of the table. Air resistance is negligible. Derive an expressions for the following quantities only in terms of [katex] M, x, D, h, [/katex] and any constants. (a) The time elapsed from the instant the block leaves the table to the instant it strikes the floor. (b)The horizontal component of the velocity of the block just before it hits the floor. (c) The work done on the block by the spring. (d) The spring constant.

A lighter car and a heavier truck, each traveling to the right with the same speed v hit their brakes. The retarding frictional force F on both cars turns out to be constant and the same. After both vehicles travel a distance D (and both are still moving), which of the following statements is true?

A 100 kg person is riding a 10 kg bicycle up a 25° hill. The hill is long and the coefficient of static friction is 0.9. The person rides 10 m up the hill then takes a rest at the top. If she then starts from rest from the top of the hill and rolls down a distance of 7 m before squeezing hard on the brakes locking the wheels. How much work is done by friction to bring the bicycle to a full stop, knowing that the coefficient of kinetic friction is 0.65?

In which one of the following circumstances does the principle of conservation of mechanical energy apply, even though a nonconservative force acts on the moving object?

A person is making homemade ice cream. She exerts a force of magnitude 23 N on the free end of the crank handle on the ice-cream maker, and this end moves on a circular path of radius 0.25 m. The force is always applied parallel to the motion of the handle. If the handle is turned once every 1.7 s, what is the average power being expended?

An object is projected vertically upward from ground level. It rises to a maximum height H. If air resistance is negligible, which of the following must be true for the object when it is at a height H/2 ?

A child pushes horizontally on a box of mass m with constant speed v across a rough horizontal floor. The coefficient of friction between the box and the floor is µ. At what rate does the child do work on the box?

A satellite in circular orbit around the Earth moves at constant speed. This orbit is maintained by the force of gravity between the Earth and the satellite, yet no work is done on the satellite. How is this possible?

Two balls are thrown off a building with the same speed, one straight up and one at a 45° angle. Which statement is true if air resistance can be ignored?

A 0.5 kg cart, on a frictionless 2 m long table, is being pulled by a 0.1 kg mass connected by a string and hanging over a pulley. The system is released from rest. After the hanging mass falls 0.5 m, calculate the speed of the cart on the table. Use ONLY forces and energy.

The box in the diagram is sliding to the right across a horizontal table, under the influence of the forces shown. Which force(s) is doing negative work on the box?

Two blocks of ice, one five times as heavy as the other, are at rest on a frozen lake. A person then pushes each block the same distance d. Ignore friction and assume that an equal force F is exerted on each block. Which of the following statements is true about the kinetic energy of the heavier block after the push?

An object with a mass m = 80 g is attached to a spring with a force constant k = 25 N/m. The spring is stretched 52.0 cm and released from rest. If it is oscillating on a horizontal frictionless surface, determine the velocity of the mass when it is halfway to the equilibrium position.

You are working out on a rowing machine. Each time you pull the rowing bar toward you, it moves a distance of 1.25 m in a time of 0.84 s. The readout on the display indicates that the average power you are producing is 76 W. What is the magnitude of the force that you exert on the handle?

In 3.0 minutes, a ski lift raises 10 skiers at constant speed to a height of 85 m. The average mass of each skier is 67.5 kg. What is the average power provided by the tension in the cable pulling the lift?

A crate is pulled 2.5 m at constant velocity along a 25° incline. The coefficient of kinetic friction between the crate and the plane is 0.250. What is the efficiency of this procedure?

The efficiency of a pulley system is 55%. The pulleys are used to raise a mass of 90.0 kg to a height of 5.60 m. What force is exerted on the rope of the pulley system if the rope is pulled for 22 m in order to raise the mass to the required height?

An object at rest suddenly explodes into two fragments by an explosion. One fragment acquires 3 times the kinetic energy of the other. What is the ratio of their masses?

Refer to the diagram above and solve all equations in-terms of R, M, k, and constants. What is the speed mass 2M as it reaches point B? Calculate the tension in the string supporting mass 2M as it reaches point B. Mass 2M collides with a smaller mass M at point B. After the collision, mass 2M has a speed equal to 1/3 its original value before the collision. What is the speed of mass M after the collision? Mass M then moves along the ground without friction with the speed found in #3 above, until it collides with the spring. Determine the maximum compression of the spring at C.

A \( 0.0350 \) \( \text{kg} \) bullet moving horizontally at \( 425 \) \( \text{m/s} \) embeds itself into an initially stationary \( 0.550 \) \( \text{kg} \) block.

A ball is thrown straight up. At what point does the ball have the most energy?

A block of mass 3.0 kg is hung from a spring, causing it to stretch 12 cm at equilibrium. The 3.0 kg block is then taken off and the spring returns to its original height. Now a 4.0 kg block is placed on the spring and released from rest. How far will the 4.0 kg block fall before its direction is reversed?